Base & Cavity Closure Flashings are made in 3.0m lengths
| A | 99mm |
| B | 30mm |
| C | 10mm |
| D | 36mm |
| E | 25mm |
Base & Cavity Closure Flashings are made in 3.0m lengths
| A | 83mm | |
| B | 30mm | |
| C | 10mm | |
| D | 52mm | |
| E | 25mm |
*Solid Plaster & Aluminium should not come in contact
Galvanised Steel
Aluminium Colorsteel Maxam Stainless Steel
Specifications:
- Galvanised Steel - Z450 - 0.55mm
- Aluminium - 5000 Series - 0.7mm
- Colorsteel Maxam - Ebony - 0.55mm
- Stainless Steel - 304 - 0.5mm
Refer to E2/AS1 - Tables 20, 21 & 22
Quickflash Code 01 and Quickflash Code 10 Base & Cavity Closure flashing allow for venting & draining the cavity as well as providing a straight rigid base for the solid plaster to finish to.
The positioning of the drainage holes means that if the foundation is plastered it will not interfere with the air movement and drainage of the cavity.
External Corner Joiners Quickflash Code 15 (fits Code 01) & Quickflash Code 16 (fits Code 10) are recommended, strengthen corners, save time & leave straight lines.
We also provide End Caps for where the flashing butts into a doorway or just terminates. These are Quickflash Code 44 (fits Code 01) and Quickflash Code 45 (fits Code 10).
