• Home
  • Saddles & Parapets
  • Double Saddle

Double Joist Saddle Flashing

Quickflash Code 105  - 200x100 joists - Code 105D for Dry Frame Size 190x90 joists

Quickflash Code 106  - 300x100 joists - Code 106D for Dry Frame Size 290x90 joists

Code 105 - (200 x 100 joist)

All A measurements include the 35mm overhang required by the building code

A 235mm
B 100mm
C 70mm
D 50mm
E 10mm
F 30mm

Code 106 - (300 x 100 joist)

All A measurements include the 35mm overhang required by the building code

A 335mm
B 100mm
C 70mm
D 50mm
E 10mm
F 30mm

Available In

Saddle flashings are only available in 0.5 mm stainless steel as these generally come into contact with treated timber.

   Galvanised Steel
   Aluminium
   Colorsteel Maxx
   Stainless Steel

Specifications:

  • Galvanised Steel  - Z450 - 0.55mm
  • Aluminium - 5000 Series - 0.7mm
  • Colorsteel Maxx - Thunder Grey  -  0.55mm
  • Stainless Steel - 304 - 0.5mm

Refer to E2/AS1 - Tables 20, 21 & 22

Product Details

35mm has been added to the A measurement to allow the saddle flashing to extend below the floor joist.

Double joist saddle Flashings are positioned over a joist or other member that protrudes through the cladding in a direct fix or cavity situation.

Downloads

PDF

DXF

DWG

RFA

 

Disclaimer

TERMS OF USE Disclaimer: This information is intended solely as a guide for use of Quickflash products. Before using you should ensure that the product is suitable for use in the specific application. Nothing in this information constitutes a statement of fitness for particular purpose and appropriate expert advice is to always be obtained.

 

  • Bunnings
  • Carters Logo
  • HendersonTimbers
  • ITM
  • M10
  • MEGA
  • MegaTrade
  • Placemakers
  • SPT
  • TimberWorld

    e: info@quickflash.co.nz 

    p: 03 543 2145

    f: 03 543 2146